Red 2" x 100' Medium Duty Discharge Hose

Description

Maximum Pressure - 150 psi for open ended discharge applications only
Tube - Red Lay Flat PVC
Approximate wall thickness - 0.080"
Weight per foot - 0.29 pounds
Type of use - Water
Red lightweight lay flat PVC discharge hose is rated for light to medium duty. This hose is designed to be used in lower range water pressure situations having a maximum pressure of 150 psi. This pump discharge hose is constructed from red PVC and reinforced by polyester yarn. Popular hose for general outdoor low pressure discharge applications. Not intended for indoor use, firefighting or closed pressure applications such as use with nozzles.
NPSH Threads
Hoses with National Pipe Straight Hose Thread (NPSH or NPS) has the same threads per inch (TPI) as National Pipe Thread (NPT) but the threads do not taper. This allows a female coupling to thread onto a NPT fitting without being a permanent connection. For example, a female hose coupling with NPSH threads will only connect to a PVC pipe, metal pipe or couplings with NPSH or NPT threads. Fittings that are connected together by NPT by NPT require a sealing agent like pipe cement or teflon tape because the threads are making the seal and a permanent connection. When a female NPSH is threaded onto a male NPT fitting, it allows this connection to thread on and off frequently by using a gasket to seal.
The male side with NPSH threads will only connect to fittings, nozzles or hoses with NPSH threads. It will NOT thread into a NPT female. For example, a male hose coupling with NPSH threads will require a nozzle with NPSH threads.
We are a firefighter owned and operated company since 2011.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.